Select Policy:
Select the name of the policy.
Select ACL:
Select the ACL for configuration in the policy.
S-Mirror:
Select S-Mirror to mirror the data packets in the policy to the specific
port.
S-Condition:
Select S-Condition to limit the transmission rate of the data packets in
the policy.
z
Rate: Specify the forwarding rate of the data packets those match
the corresponding ACL.
z
Out of Band: Specify the disposal way of the data packets those
are transmitted beyond the rate.
Redirect:
Select Redirect to change the forwarding direction of the data packets
in the policy.
z
Destination Port: Forward the data packets those match the
corresponding ACL to the specific port.
QoS Remark:
Select QoS Remark to forward the data packets based on the QoS
settings.
z
DSCP: Specify the DSCP region for the data packets those match
the corresponding ACL.
z
Local Priority: Specify the local priority for the data packets those
match the corresponding ACL.
10.4 Policy Binding
Policy Binding function can have the policy take its effect on a specific port/VLAN. The policy will
take effect only when it is bound to a port/VLAN. In the same way, the port/VLAN will receive the
data packets and process them based on the policy only when the policy is bound to the
port/VLAN.
The Policy Binding can be implemented on
Binding Table
,
Port Binding
and
VLAN Binding
pages.
10.4.1 Binding Table
On this page view the policy bound to port/VLAN.
Choose the menu
ACL
→
Policy Binding
→
Binding Table
to load the following page.
Figure 10-12 Binding Table
The following entries are displayed on this screen:
131
