153
The following entries are displayed on this screen:
Port Priority Config
UNIT:1/LAGS:
Click
1
to configure the physical ports. Click
LAGS
to configure
the link aggregation groups.
Select:
Select the desired port to configure its priority. It is multi-optional.
Port:
Displays the physical port number of the switch.
Priority:
Specify the priority for the port.
LAG:
Displays the LAG number which the port belongs to.
Configuration Procedure:
Step Operation
Description
1
Select the port priority
Required. On
QoS
→
DiffServ
→
Port Priority
page,
configure the port priority.
2
Configure the mapping
relation between the 802.1P
priority and TC
Required. On
QoS
→
DiffServ
→
802.1P Priority
page,
configure the mapping relation between the 802.1P
priority and TC.
3
Select a schedule mode
Required. On
QoS
→
DiffServ
→
Schedule Mode
page,
select a schedule mode.
10.1.2 Schedule Mode
On this page you can select a schedule mode for the switch. When the network is congested, the
problem that many packets compete for resources must be solved, usually in the way of queue
scheduling. The switch will control the forwarding sequence of the packets according to the priority
queues and scheduling algorithms you set. On this switch, the priority levels are labeled as TC0,
TC1… TC7.
Choose the menu
QoS
→
DiffServ
→
Schedule Mode
to load the following page.
Figure 10-7 Schedule Mode