![background image](http://html1.mh-extra.com/html/tp-link/jetstream-t1600g-28ps/jetstream-t1600g-28ps_user-manual_1145651140.webp)
131
Choose the menu
Multicast
→
MLD Snooping
→
Multicast VLAN
to load the following page.
Figure 8-16 Multicast VLAN Config
The following entries are displayed on this screen:
Multicast VLAN
Multicast VLAN:
Select Enable/Disable Multicast VLAN feature.
VLAN ID:
Enter the VLAN ID of the multicast VLAN.
Router Port Time:
Specify the aging time of the router port. Within this time, if the
switch doesn’t receive MLD query message from the router port, it
will consider this port is not a router port any more.
Member Port Time:
Specify the aging time of the member port. Within this time, if the
switch doesn’t receive MLD report message from the member
port, it will consider this port is not a member port any more.
Dynamic Router
Ports:
Displays the dynamic router ports of the multicast VLAN.
Static Router Ports:
Specify the static router port which is mainly used in the network
with stable topology.
Note:
1. The Multicast VLAN won't take effect unless you first complete the configuration for the
corresponding VLAN owning the port on the
802.1Q VLAN
page.
2. The router port should be in the multicast VLAN, otherwise the member ports cannot receive
multicast streams.
3. Configure the link type of the router port in the multicast VLAN as Tagged otherwise all the
member ports in the multicast VLAN cannot receive multicast streams.