Configuring QoS
Configuring Basic QoS
User Guide
63
2.1 Configuring QoS in Port Based Mode
Choose the menu
QoS > QoS Basic
to load the following page.
Figure 2-1
Configuring Basic QoS in Port Based Mode
Follow these steps to configure QoS in port based mode:
1) In the
Global Config
section, select QoS mode as
Port Based.
Click
Apply
.
QoS Mode
Select the QoS mode.
Port Based
: In port based mode, the switch prioritizes packets according
to their ingress ports, regardless of the packet field or type.
2) In the
Port-based Priority Setting
section, select the desired ports and specify the
priority queue for the ports. Click
Apply
.
Priority Queue
Specify the priority queue that the packets from the port are mapped to.
The priorities are labeled as 1, 2, 3 and 4. Among them, the bigger value
means the higher priority.
Содержание Easy Smart Switch
Страница 1: ...User Guide Easy Smart Switch 1910012769 REV5 1 0 May 2020...
Страница 7: ...Part 1 Introduction CHAPTERS 1 Product Overview 2 Logging Into the Switch...
Страница 62: ...User Guide 58 Configuring VLAN Configuration Example for 802 1Q VLAN Figure 5 5 Configuring 802 1Q PVID...
Страница 75: ...Figure 5 3 Setting Different Priorities for Port 1 and Port 2...