Switching
Configuring LAG
User Guide
29
Note:
●
It is recommended to configure the LAG function before configuring the other functions
for the member ports.
●
Ensure that devices on both ends of the aggregation link use the same number of physical
ports with the same speed and duplex mode, flow control setting and QoS setting.
●
Mirroring and mirrored ports cannot be added to an LAG group.
●
The maximum of LAG groups varies among different devices. To check the maximum of
LAG groups, refer to the actual web interface.
●
Each LAG group has 2 port members at least and 4 port members at most.
Содержание Easy Smart Switch
Страница 1: ...User Guide Easy Smart Switch 1910012769 REV5 1 0 May 2020...
Страница 7: ...Part 1 Introduction CHAPTERS 1 Product Overview 2 Logging Into the Switch...
Страница 62: ...User Guide 58 Configuring VLAN Configuration Example for 802 1Q VLAN Figure 5 5 Configuring 802 1Q PVID...
Страница 75: ...Figure 5 3 Setting Different Priorities for Port 1 and Port 2...
