TP-Link Deco X73-DSL Скачать руководство пользователя

Страница: 84 / 84

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

• Do not use damaged charger or USB cable to charge the device.

• Do not use any other chargers than those recommended.

• Do not use the device where wireless devices are not allowed.

• Adapter shall be installed near the equipment and shall be easily accessible.

• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t

hesitate to contact us.

• Operating Temperature: 0°C~40°C (32°F~104°F)

• Storage Temperature: -40°C~60°C (-40°F~140°F)

• Operating Humidity: 10%~90%RH, Non-condensing

• Storage Humidity: 10%~90%RH, Non-condensing

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to

improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

Symbol

Explanation

DC voltage
Caution
Operator’s manual

Indoor use only

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means

that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to

minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new

electrical or electronic equipment.

Содержание Deco X73-DSL





















































































Результаты поиска

Содержание Deco X73-DSL

Отзывы:

Похожие инструкции для Deco X73-DSL

Бренды по названию

Популярные бренды

TP-Link Deco X73-DSL, Руководство пользователя

Результаты поиска

Содержание Deco X73-DSL

Отзывы:

Похожие инструкции для Deco X73-DSL

Бренды по названию

Популярные бренды