15
Chapter 4
Set Up Internet Connections
4
Select your WAN Interface Name (
Status
should be
Connected
) and click the
(Edit) icon.
5
Scroll down the page, enable
IPv6
, and configure the IPv6 parameters.
Addressing Type:
Consult your ISP for the addressing type, DHCPv6 or SLAAC.
SLAAC is the most commonly used addressing type.
IPv6 Gateway:
Keep the default setting as
Current Connection
.
Note:
If your ISP has provided the IPv6 address, click
Advanced
to reveal more settings. Check to use
IPv6 specified by ISP and enter the parameters provided by your ISP.
6
Click
OK
to make the settings effective. Now IPv6 service is available for your
network.
4 5 More Operation Modes
The modem router supports three operation modes: DSL Modem Router Mode, Wireless
Router mode, and 3G/4G Router Mode. The modem router uses the DSL Modem Router
Mode by default, and you can change the mode according to your needs.
4 5 1 Wireless Router Mode
If you already have a modem or your internet comes via an Ethernet jack on the wall,
you can set up the modem router as a regular wireless router to share the internet.
1
Find the WAN port (labeled as “WAN” or “LAN4/WAN”) on the modem router, and
connect it to your existing modem or the Ethernet jack on the wall. Then connect
