99
Chapter 13
Specify Your Network Settings
2
Visit
http://tplinkmodem.net
, and log in with the password
you set for the modem router.
3
Go to
Advanced
>
Network
>
Advanced Routing
. Select your
current
WAN Interface
and click
Save
.
4
Click
Add
to add a new static routing entry. Finish the settings
according to the following explanations:
•
Destination IP:
The destination IP address that you want to
assign to a static route. This IP address cannot be on the same
subnet with the WAN IP or LAN IP of the router. In the example,
the IP address of the company network is the destination IP
address, so here enters 172.30.30.1.
•
Subnet Mask:
Determines the destination network with the
destination IP address. If the destination is a single IP address,
enter 255.255.255.255; otherwise, enter the subnet mask of
the corresponding network IP. In the example, the destination
network is a single IP, so here enters 255.255.255.255.
