background image

30

Chapter 7

 

Parental Controls

4  

Click 

Scan

 and select the device to be controlled. Or enter the 

Device Name

 and 

MAC Address 

manually.

5  

Click the   icon to set the Effective Time. Drag the cursor over the appropriate 

cell(s) and click 

OK

.

6  

Enter a 

Description

 for the entry.

7  

Select the checkbox to enable this entry and click 

Save

.

8  

Select the restriction tpye.

1 )  With 

Blacklist

 selected, the controlled devices cannot access any websites 

containing the specified keywords during the  Effective Time period.

2 )  With 

Whitelist 

selected, the controlled devices can only access websites containing 

the specified keywords during the  Effective Time period.

9  

Click 

Add a New Keyword

. You can add up to 200 keywords for both Blacklist and 

Whitelist. Below are some sample entries to allow access.

1 )  Enter a web address (e.g. www.tp-link.com) or a web address keyword (e.g. wikipedia) 

to only allow or block access to the websites containing that keyword.

Содержание Archer MR500















































































































Отзывы: