TP-Link Archer C55, Руководство пользователя

Страница: 73 / 124

Archer C55 AC1200 Wireless Dual Band Gigabit Router
- 68 -

Trigger Port - The port for outgoing traffic. An outgoing connection using this port will trigger
this rule.

Trigger Protocol - The protocol used for Trigger Ports, either TCP , UDP , or All (all
protocols supported by the router).

Open Port - The port or port range used by the remote system when it responds to the
outgoing request. A response using one of these ports will be forwarded to the PC which
triggered this rule. You can input at most 5 groups of ports (or port sections). Every group of
ports must be separated with ",", for example, 2000-2038, 2046, 2050-2051, 2085,
3010-3030.

Open Protocol
- The protocol used for
Open Port
, either
TCP
,
UDP
, or
ALL
(all protocols
supported by the router).

Status - The status of this entry, Enabled means the Port Triggering entry is enabled.

Edit - To modify or delete an existing entry.

Common Applications - Some popular applications already listed in the drop-down list of
Incoming Protocol .
To add a new rule, follow the steps below.
1. Click the Add New button, the next screen will pop-up as shown in the following figure.
2. Select a common application from the Common Applications drop-down list, then the
Trigger Port field and the Open Port field will be automatically filled. If the Common
Applications do not have the application you need, enter the Trigger Port and the Open
Port manually.
3. Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, either
TCP , UDP , or All .
4. Select the protocol used for Incoming Ports from the
Open Protocol
drop-down list, either
TCP or UDP , or All.
5. Select Enabled in Status field.
6. Click the Save button to save the new rule.