TP-Link Archer C24 Скачать руководство пользователя страница 90

Страница: 90 / 103

• Use another web browser or computer to log in again.
• Reset the router to factory default settings and try again. If the login still fails, please

contact the technical support.

Note

: You’ll need to reconfigure the router to surf the internet once the router is reset.

Q4 What should I do if I cannot access the internet even though the

configuration is finished?

Visit

http://tplinkwifi.net

, and log in to with the password you set for the router.

Go to

Advanced

Network

Status

to check the Internet status:

If IP Address is a valid one, please try the methods below and try again:

• Your computer might not recognize any DNS server addresses, please manually

configure DNS server.

1 ) Go to

Advanced

Network

DHCP Server

2 ) Enter 8.8.8.8 as Primary DNS, and click

Save

Tips:

8.8.8.8 is a safe and public DNS server operated by Google.

Содержание Archer C24








































































































Результаты поиска

Содержание Archer C24

Отзывы:

TP-Link Archer C24, Руководство пользователя, Страница: 90 / 103

Результаты поиска

Содержание Archer C24

Отзывы: