TP-Link Archer C24 Скачать руководство пользователя страница 23

Страница: 23 / 103

Chapter 4

Configure the Router in Wireless Router Mode

•

LAN

- This field displays the current settings of the LAN, and you can configure them

on the

Advanced

Network

LAN

page.

•

MAC Address

- The physical address of the router.

•

IP Address

- The LAN IP address of the router.

•

Subnet Mask

- The subnet mask associated with the LAN IP address.

•

DHCP Server

- This field displays the current settings of DHCP (Dynamic Host

Configuration Protocol) Server, and you can configure them on the

Network

DHCP

Server

page.

•

DHCP Server

- Indicates whether the DHCP server is enabled of disabled. It is

enabled by default and the router acts as a DHCP server.

•

IP Address

Pool

- The IP address range for the DHCP server to assign IP

addresses.

•

Dynamic DNS

- This field displays the current settings of the Dynamic DNS (Domain

Name System), and you can configure them on the

Advanced

Network

Dynamic

DNS

page.

•

Service Provider

- The Dynamic DNS service provider you have signed up for.

•

Host Name

- The Domain Name you have entered in the

Dynamic DNS

page.

•

Status

- The status of the Dynamic DNS service connection.

4 2 2 Internet

1. Visit

http://tplinkwifi.net

, and log in with the password you set for the router.

2. Go to

Advanced

Network

Internet

3. Set up the internet connection and click

SAVE

Dynamic IP

If your ISP provides the DHCP service, please select

Dynamic IP

, and the router will

automatically get IP parameters from your ISP.
Click

Renew

to renew the IP parameters from your ISP.

Click

Release

to release the IP parameters.

Содержание Archer C24








































































































Результаты поиска

Содержание Archer C24

Отзывы:

TP-Link Archer C24, Руководство пользователя, Страница: 23 / 103

Результаты поиска

Содержание Archer C24

Отзывы: