Archer C2
AC750 Wireless Dual Band Gigabit Router
- 98 -
There are two submenus under the Advanced Routing menu as shown in Figure 4-87:
Static
Route List
and
System Routing Table
.
Click any of them, and you will be able to configure the
corresponding function.
4.16.1
Static Route List
Choose menu “
Advanced Routing
→
Static Route List
”, and then you can configure the static
route in the next screen (shown in Figure 4-88). A static route is a pre-determined path that
network information must travel to reach a specific host or network.
Figure 4-88 Static Route
To add static route entries:
1. Click
Add New
shown in Figure 4-88, you will see the following screen.
Figure 4-89 Add or Modify a Static Route Entry
2. Enter the following data:
Destination IP Address
- The Destination IP Address is the address of the network or
host that you want to assign to a static route.
Subnet Mask
-
The
Subnet Mask
determines which portion of an IP Address is the
network portion, and which portion is the host portion.
Gateway
- This is the IP Address of the gateway device that allows for contact between
the router and the network or host.
