Q1. What should I do if the Tether app cannot find my device?
1.
Connect your smartphone to the extender’s network
TP-Link_Extender
.
2.
Launch the Tether app, and select your extender.
Tip:
If you have connected to the extender’s Wi-Fi but still cannot find your device, turn off
your cellular data.
3.
Follow app instructions to complete the setup.
If you are still having problems, contact our technical support.
Q2. What should I do if the Signal LED doesn’t turn solid on after
completing setup via the Tether app or web browser?
You may have entered incorrect Wi-Fi passwords for your host networks during
the configuration. Check the passwords and try again.
Make sure the extender is close to your router, preferably within 16 feet, and
away from large electrical appliances.
If you have enabled wireless MAC filtering, wireless access control, or access
control list (ACL) on your router, disable them first, then follow any method on the
front page to complete the configuration.
Try setting up via the WPS button.
Reset the extender and go through the configuration again.
If you are still having problems, contact our technical support.
Q3. How do I reset the extender?
With the extender powered on, use a pin to press the
RESET
button for 1
second. The extender will reboot.
LED Explanation
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device.
Please use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU) 2015/863. The original EU declaration of
conformity may be found at https://www.tp-link.com/en/ce.
RESET
LED
Status
Indication (For Range Extender Mode)
The extender is connected or not connected to the
5GHz wireless network of your router.
5GHz
On/Off
The extender is connected or not connected to the
2.4GHz wireless network of your router.
2.4GHz
On/Off
The extender is on or off.
The system is starting up or firmware upgrade is in
progress.
Power
On/Off
Blinking
The extender is connected to your router’s
wireless network and is in a suitable location.
The extender is receiving a weak signal. Try
relocating it closer to your router.
WPS connection is in progress.
No wireless connection is established.
Signal
Solid blue
Solid red
Blinking
Off
Method 2: Via a Web Browser
Method 1: Via the Tether App
1.
Connect your computer or smartphone to the extender’s network
.
If you are
using a computer, unplug the Ethernet cable if any.
2.
Launch a web browser, enter
http://tplinkrepeater.net
in the address bar, and
log in.
3.
Manage the extender as needed.
1.
Connect your smartphone to the extender‘s or router’s network.
2.
Launch the Tether app, select your extender, and log in.
3.
Manage the extender as needed.
Manage the Extender
After setup, you can manage the extender via any of the methods below.
Note:
If your extender and router use the same network name, Method 1 is recommended.
TP-Link OneMesh router and extenders work together to form one unified Wi-Fi
network. Walk through your home and stay connected with the fastest possible
speeds thanks to OneMesh’s seamless coverage.
OneMesh
TM
with Seamless Roaming
Seamless Roaming
Devices automatically switch between your router and extenders as you move through your
home for the fastest possible speeds.
Unified Wi-Fi Network
Router and extenders share the same wireless settings, including network name, password,
access control settings and more.
Easy Setup and Management
Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the
Tether app or at your router’s web management page.
To check full list of TP-Link OneMesh devices, scan the QR code,
or visit
https://www.tp-link.com/One-Mesh/compatibility
For technical support, the user guide and other information, please
visit
https://www.tp-link.com/support
, or simply scan the QR code.
If you have any suggestions or needs on the product guides,
welcome to email
.
To ask questions, find answers, and communicate with TP-Link
users or engineers, please visit
https://community.tp-link.com
to join TP-Link Community.
Wi-Fi
Wi-Fi
TP-Link_Extender
CHOOSE A NETWORK...
< Settings
My Devices
Local Device
REXXX
XX-XX-XX-XX-XX-XX
