!
G: The TIMER indicator
light indicates that the
timer function has been
switched on.
In case of any
malfunctioning the
information display will
tell you what is the
matter.
F
USING THE TIMER
The timer allows you to switch on the heater automatically at a preset time.
In order to switch on the timer, the correct time must have been set
(refer to
Section C)
ANDTHEHEATERSHOULDBEOFF&OLLOWTHEPROCEDUREBELOW
1
0RESSTHE
button
ANDTHENTHE4)-%2KEY
immediately after that.
4HE4)-%2LAMP
ANDTHEDIGIT
will start blinking.
2
5SETHEADJUSTMENTKEYS
to set the time at which the heater must ignite.
5SETHEKEYONTHELEFT
쑼
hour) to set the hours and the key on the right
(
쑿
min.) to set the minutes (interval of 5 minutes)
.
3
!FTERAPPROXIMATELYSECONDSTHEDIGITWILLSHOW#,/#+AGAINANDTHE
4)-%2LAMP
will light up, indicating that the timer function has been
ACTIVATED&IG'
4
The timer will ensure that the room will have been heated to approximately
THEREQUIREDTEMPERATUREATTHESETTIME
When you want to switch off the heater and ignite it again with the timer, all
YOUHAVETODOISPRESSTHE4)-%2KEY
(refer to Section G).
0RESSTHE
button
once to clear the timer setting.
G
SWITCHING OFF THE HEATER
There are two ways to switch off the heater.
1
0RESS THE
button
. The information display will show the CLOCK
signal. Within approximately one minute the flame will have extinguished.
2
0RESSTHE4)-%2KEY
, when you want to switch off the heater and ignite it
again with the timer the next time. This not only switches off the heater, but
ITALSOACTIVATESTHETIMERFUNCTION9OUCANCHANGETHEREQUIREDTIMEWITH
the adjustment keys
(refer to Section F).
H
THE INFORMATION DISPLAY
The information display
not only serves as an indicator of the (set) time and
temperature (
sections C, E, and F
), it also indicates any malfunctioning of the
heater. The code on the information display tells you what is the matter:
CODE
INFORMATION
WHAT TO DO
e - 0
4EMPERATUREWITHINTHEHEATERTOOHIGH
#OOLDOWNANDREIGNITE
f - 0
0OWERINTERRUPTED
2EIGNITETHEHEATER
e - 1
&AULTYTHERMOSTAT
#ONTACTYOURDEALER
f - 1
&AULTYBURNERTHERMISTOR
#ONTACTYOURDEALER
e - 2
Starting problems.
Contact your dealer.
4
7
