Toyotomi TRN/TRG-528ZR, Руководство пользователя

Страница: 14 / 116

14
GB
QUIET button (not available)
X-FAN button
12
13
Press this button, the Quiet status is under the Auto Quiet mode (display " " and
"AUTO" signal ) and Quiet mode (display " " singal) and Quiet OFF (there is no
signal of " " displayed), after powered on, the Quiet OFF is defaulted.
Note:
Ɣ
The Quiet function cannot be set up in Fan and Dry mode; Under the Quiet mode,
the fan speed is not available.
Ɣ,I
Auto Quiet mode has been selected, after the room temperature reached the
setting temperature or 10mins later, the AC will immediately enter into the Quiet
running status, at this time the fan speed is not adjustable.
Pressing this button in COOL or DRY mode, the icon " " is displayed and the
indoor fan will continue operation for 2 minutes in order to dry the indoor unit even
though you have turned off the unit. After energization, X-FAN OFF is defaulted.
X-FAN is not available in AUTO, FAN or HEAT mode.
This function indicates that moisture on evaporator of indoor unit will be blowed
after the unit is stopped to avoid mould.
Ɣ+DYLQJVHW;
FAN function on: After turning off the unit by pressing ON/OFF
button indoor fan will continue running for about 2 min. at low speed. In this
period, press X-FAN button to stop indoor fan directly.
Ɣ+DYLQJVHW;
FAN function off: After turning off the unit by pressing ON/OFF
button, the complete unit will be off directly.
Introduction for buttons on remote controller
Press this button to set clock time. " " icon on remote controller will blink. Press
ŸRUEXWWRQZLWKLQVWRVHWFORFNW
i
PH(DFKSUHVVLQJRIŸRUEXWWRQ
clock time will increase or decrease 1 min
XWH,IKROGŸRUEXWWRQVODWHU
,
time will change quickly. Release this button when reaching your required time.
Note:
Ɣ&ORFNWLPHDGRSWVKRXUPRGH
Ɣ
The interval between two operation can
¶WH[FHHGVV2WKHUZLVHUHPRWHFRQWUR
ller will quit setting status. Operation for TIMER ON/TIMER OFF is the same.
CLOCK button
11
Ÿ
Ÿ Ÿ
Note:
Ɣ8QGHURQDQGR
ff status, you can set TIMER OFF or TIMER ON simultaneously.
Ɣ%HIRUHVHWWLQJ
TIMER ON or TIMER OFF, please adjust the clock time.
Ɣ
After starting up TIMER ON or TIMER OFF, set the constant circulating valid.
After that, air conditioner will be turned on or turned off according to setting time.
ON/OFF button has no effect on setting. If you don’t need this function, please
use remote controller to cancel it.