Toyotomi STG-909R32, Руководство пользователя

Страница: 5 / 140

5
GB

If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons to avoid a hazard.

The temperature of refrigerant circuit will be high, please keep the
interconnection cable away from the copper tube.

The appliance shall be installed in accordance with national wiring
regulations.

Installation must be performed in accordance with applicable local
regulations by authorized licensed personnel only.

The air conditioner is the first-class electric appliance. It must be properly
grounding with specialized grounding device by a professional. Please
make sure it is always grounded effectively, otherwise it may cause electric
shock.

The yellow-green wire in air conditioner is grounding wire, which can't be
used for other purposes.

The grounding resistance should comply with national electric safety
regulations.

The appliance must be positioned so that the plug is accessible.

All wires of indoor unit and outdoor unit should be connected by a
professional.

If the length of power connection wire is insufficient, please contact the
supplier for a new one. Avoid extending the wire by yourself.

For the air conditioner with plug
，
the plug should be reachable after
finishing installation.

For the air conditioner without plug, a circuit break must be installed in the
line.

If you need to relocate the air conditioner to another place, only the
qualified person can perform the work. Otherwise, it may cause personal
injury or damage.

Select a location which is out of reach for children and far away from
animals or plants. If it is unavoidable, please add the fence for safety
purpose.

The indoor unit should be installed close to the wall.

Instructions for installation and use of this product are provided by the
manufacturer.

The air conditioner is not allowed to use in a room that has running fire
(such as fire source, working coal gas ware, operating heater).

It is not allowed to drill hole or burn the connection pipe. These tasks shall
only be done by a licensed technician to ensure your safety.

Leak test is a must after installation.

Don’t install the air conditioner in a place where there is flammable gas or
liquid. It may cause fire even explosion.
This product contains fluorinated greenhouse gases

Do not repair air conditioner by yourself. It may cause electric shock or
damage. Please contact dealer when you need to repair air conditioner.

Do not extend fingers or objects into air inlet or air outlet. It may cause
personal injury or damage.

Do not block air outlet or air inlet. It may cause malfunction.

Do not spill water on the remote controller, otherwise the remote controller
may be broken.

When below phenomenon occurs, please turn off air conditioner and
disconnect power immediately and then contact the dealer or qualified
professionals for service.
 Power cord is overheating or damaged.
 There’s abnormal sound during operation.
 Circuit break trips off frequently.

Air conditioner gives off burning smell.
 Indoor unit is leaking.

If the air conditioner operates under abnormal conditions, it may cause
malfunction, electric shock or fire hazard.

When turning on or turning off the unit by emergency operation switch,
please press this switch with an insulating object other than metal.

Do not step on top panel of outdoor unit or put heavy objects. It may cause
damage or personal injury.

Installation must be performed by qualified professionals. Otherwise, it may
cause personal injury or damage.

Must follow the electric safety regulations when installing the unit.

According to the local safety regulations, use qualified power supply circuit
and circuit break.

Install the circuit break. If not, it may cause malfunction.

An all-pole disconnection switch having a contact separation of at least
3mm in all poles should be connected in fixed wiring.

Including a circuit break with suitable capacity, please note the following
table. Air switch should be included magnet buckle and heating buckle
function, it can protect the circuit-short and overload.

Air Conditioner should be properly grounded. Incorrect grounding may
cause electric shock.

Don't use unqualified power cord.

Make sure the power supply matches with the requirement of air
conditioner. Unstable power supply or incorrect wiring or malfunction.
Please install proper power supply cables before using the air conditioner.

Properly connect the live wire, neutral wire and grounding wire of power
socket.

Be sure to cut off the power supply before proceeding any work related to
electricity and safety.

Do not put through the power before finishing installation.