
83
GB
DEHUMIDIFIER / AIR PURIFIER
After cleaning the lens
of PM2.5 sensor cover,
please put it back.
PM2.5 detection lens
Wipe the lens with a dry
cotton swab. Do not apply
excessive force to the
lens, otherwise it may
cause damage.
2. Clean the sensor lens gently, with a dry cotton swab.
3. Install the cover of sensor.
4.
DO NOT
wipe the sensor lens with alcohol or other organic solvent.
NOTES:
• Please do not stick the cotton swab into other parts of the lens.
• Be sure to operate the unit when the power plug is disconnected.
Cleaning of humidity sensor
If the sensor is dusty, the indications may not be accurate, and it may not work
normally. It is recommended to maintain the humidity sensor once every month
and clean it with the brush of vacuum cleaner.
NOTE:
Be sure to operate the unit when the power plug is disconnected.
Grille and Case
To clean the case:
When there is dust on the case of the device, use soft towel to dust it off.
Humidity sensor