WARNING:
This unit must be installed in accordance with these instructions, local codes, ordinances and/or in the
absence of local codes National Plumbing standards.
Check and comply with all state and local codes before beginning the installation.
This unit should be installed by a licensed, authorized person(s) due to the necessity of making
electrical and water connections.
SELECTING A LOCATION
Select a place to install the unit where hot water and electric supply are easily available.
1. Select a place which is free of combustible substances.
2. Select a place where proper maintenance and repair can be provided for the unit after installation.
3. Install the unit on level floor.
NOTE: The unit may be installed on the wall directly.
Not less
than 4 in.
Not less than 12 in.
(1 ft.)
Not less
than 4 in.
SECTION D:
INSTALLATION
4
HC-20_US.qxd 14.7.1 9:13 ページ 4
