PREPARATION
1. Make sure there is no water leaking from the unit and piping.
2. Make sure electrical connections and grounding are wired properly.
3. Check for air trapped in the plumbing.
OPERATION
1. Plug into the receptacle.
2. Press the Power switch to ON position. Power lamp will come on.
3. When the hot water at the temperature of 100˚F (38˚C) or more flows into the unit, the Fan will start rotating.
POWER FAILURE RECOVERY SYSTEM
If at any time a power failure occurs during operation, the time, timer and temperature settings will be erased. When
the power returns, the unit will automatically restart with the following conditions.
Operation mode: The unit will restart in AUTO FAN mode.
TIMER:
The Timer settings will be reset. Please reset the TIMER. (See page 12 TIMER OPERATION)
Set temperature:
The Set temperature will resume to the previous temperature set.
Child Lock:
The Child Lock will be restored to the previous setting.
The power lamp will blink to indicate that a power failure has occurred and that the time and timer has been erased.
To stop the blinking power lamp, press any button once.
SECTION H:
TEST RUN
14
HC-20_US.qxd 14.7.1 9:13 ページ 14