ENGLISH
,
1
IMPORTANT
1) READ AND UNDERSTAND INSTRUCTIONS BEFORE INSTALLING OR USING HEATER.
2) RETAIN INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
3) CHECK LOCAL AUTHORITY & BUILDING CODES FOR INSTALLATION REQUIREMENTS.
SECTION A:
SPECIFICATIONS
Model:
FQ-C70 / FQ-S70
Heater Efficiency:
92.4% (1)
Heat Rating:
High - 7.00 kW (23,800 BTU/h)
Med - 4.05 kW (13,800 BTU/h)
Low - 2.18 kW ( 7,400 BTU/h)
Fuel Consumption:
High - 0.791 L/h
Med - 0.457 L/h
Low - 0.246 L/h
Fuel System:
External tank (2)
Fuel Type:
Paraffin only
Dimensions (W × H × D):
840 × 745 × 450 mm (FQ-C70)
760 × 608 × 483 mm (FQ-S70)
Weight:
40 kg (FQ-C70)
36 kg (FQ-S70)
Vent Pipe Hole:
70 ~ 80 mm diameter
Maximum Length of Vent Pipe System:
3 m, 3 bends or less (Section I “Installation”)
Electrical Rating:
220 Volts AC, 50/60 Hz
Preheat - MAX 260/260 W
Burning - MAX 55/52 W (FQ-C70)
44/46 W (FQ-S70)
(1) Heat and vaporized water are produced by fuel combustion. Heat rating does not account for heat loss due to
condensation of water vapor.
(2) External tank to be purchased separately. (Consult your supplier for options.)
SAFETY FEATURES
Your heater is equipped with a number of integral safety features. Please familiarize yourself with these features.
If the heater shuts down due to the operation of any safety device, ensure the problem is identified and corrected.
Note that normal combustion flames inside the combustion chamber, can be seen through some “peep holes”, lo-
cated in the front bottom left hand corner of the hot air outlet louvers.
1. Flame Sensor
Heater will automatically stop all operations if ignition fails or if flame fails during combustion, in order to prevent
fuel overflow. Error code will be displayed on the digital indicator.
2. Fuel Strainer
Special strainer catches any dirt or impurities present in the fuel before it is sent to the burner.
3. Overheat Protector
Automatically stops all operations if heater cabinet reaches abnormally high temperature due to motor malfunc-
tion or abnormal combustion.
4. Fully Vented System
Flue Pipe system provides outside air for combustion and vents all combustion products to outdoors.
