5
PREPARATION BEFORE USE
1
HOW TO INSTALL THE HEPA TYPE FILTER
(Be sure to assemble the HEPA Type filter before using the Air Purifier.)
1
1
Pull the front panel toward you and remove it while pressing the
right and left hooks at the bottom of the main unit.
2
2
Remove the HEPA Type filter in the bag from the main unit.
3
3
Take the HEPA Type filter out of the bag and install the filter with
the white side to the upside.
4
4
Align the nails of the upper front panel with the main unit and
push the right and left areas at the bottom.
★
It is necessary to lay the main unit down to fit the front panel
onto the unit properly.
★
If the HEPA Type filter is mounted incorrectly, the filter will not work properly.
★
Dirty HEPA Type filter cannot be reused even if they are washed. Be sure to replace them.
NOTE
★
The HEPA Type filter should be replaced about two years after opening the package. The
replacement frequency depends on how long they are used or where they are installed.
¡
The lifetime of the filter will become very short in cases where they absorb oily smoke or
carbonized substances such as soot.
English
ug
