Toyota Verso TNS510 Скачать руководство пользователя страница 98

Страница: 98 / 258

TNS 510

ADVANCED FUNCTIONS

6. Touch the button to be edited.
“Name”

: To edit the name of the area to

avoid. The names can be displayed on the

map. (See page 98.)

“Location”:

To edit area location. (See

page 99.)

“Area size”:

To edit area size. (See

page 99.)

“Active”:

To turn on or off the area to

avoid feature. To turn on the feature touch

“On”

on the “Edit area to avoid” screen.

To turn off the feature touch

“Off”

on the

“Edit area to avoid” screen.

7. Touch “OK”.

● To change “Name”
1. Touch “Name” on the “Edit area to

avoid” screen.

2. Enter the name using alphanumeric

keys.

Up to 24 letters can be entered.

3. Touch “OK”.

The previous screen will be displayed.

DISPLAYING NAMES OF AREAS TO BE

AVOIDED

The name of an area to be avoided that

may be displayed on the map can be set.

To show the name, touch “On” on the

“Edit area to avoid” screen. To not show

it, touch “Off”.

4E5042G

4E5101G

4E5043G

01955_TNS 510_OM.indd 98

21/10/2008 16:17:38

Содержание Verso TNS510



































































































































































































































































Результаты поиска

Содержание Verso TNS510

Отзывы:

Бренды по названию

Популярные бренды

Toyota Verso TNS510, Руководство пользователя

Результаты поиска

Содержание Verso TNS510

Отзывы:

Бренды по названию

Популярные бренды