Toyota TVSS IV-S Скачать руководство пользователя

Страница: 5 / 22

(LHD) -

Setting Guide

TVSS IV-S

STANDARD MODE

REMOTE OPERATION

Remove the key from the ignition key cylinder and make sure that all doors, boot and bonnet are com-
pletely closed.

Press the "LOCK"-button of the remote control once.

Indicator lights will flash once.

Status Monitor LED will start flashing.

Doors will lock.

Push the "UNLOCK" button of the remote control.

Indicator lights will flash twice.

Status Monitor LED will stop flashing.

Dome light will illuminate for 5 seconds.

Doors will unlock.

AUTO-REARMING (AUTO-RELOCK)

Press the "UNLOCK"-button of the remote control.

Indicator lights will flash twice.

Status Monitor LED will stop flashing.

Dome light will illuminate for 5 seconds.

Doors will unlock.

Wait for 30 seconds.

Indicator lights will flash once.

Status Monitor LED will start flashing.

Doors will lock.

Important notes :

a) The system will NOT Auto-rearm (NOT relock) if any of the 4 doors or bonnet

are opened after disarming the system.

Sedan models WILL Auto-rearm (relock) after 30 seconds if the boot has been
opened after disarming the system.

AUTOMATIC (PASSIVE) ARMING
(if selected see page 12)

Open the driver’s door window.

Close all doors, boot and bonnet completely.

Wait for 45 seconds, then ;

Indicator lights will illuminate for 2 seconds.

Status Monitor LED will flash continuously.

ARMING WITHOUT RADAR SENSOR DETECTION

Note :

Confirm first that the radar sensor triggers the alarm.
Refer to page 8 & 9 for radar sensor sensitivity adjustment.

Open a window.

10) Press the "UNLOCK"-button of the remote control.

Indicator lights will flash twice.

Status Monitor LED will stop flashing.

Dome light will illuminate for 5 seconds.

Doors will unlock.

11) Press the “LOCK”-button of the remote control once.

Indicator lights will flash once (1 second).

Status Monitor LED will start flashing.

Doors will lock.

12) Press the “LOCK”-button of the remote control again within 15 seconds from step 7.

Indicator lights will flash once, but this is a longer flash (3 seconds).

Содержание TVSS IV-S























Результаты поиска

Содержание TVSS IV-S

Отзывы:

Похожие инструкции для TVSS IV-S

Бренды по названию

Популярные бренды

Toyota TVSS IV-S, Руководство по настройкам

Результаты поиска

Содержание TVSS IV-S

Отзывы:

Похожие инструкции для TVSS IV-S

Бренды по названию

Популярные бренды