Toyota TVSS IV-S, Руководство по настройкам

Страница: 15 / 22

(LHD) - 16
Setting Guide TVSS IV-S
4) ANSWER BACK : Indicator light Indication ON or OFF.
PREPARATION
1) Check that all connectors and terminals of the fitting kit wire harnesses (main) and (engine)
are fitted correctly.
2) Reconnect the negative battery cable.
3) Remove the key from the ignition key cylinder and push the “ unlock ” button of the remote control.
Ë Indicator lights will flash twice.
4) Close boot and bonnet completely.
5) Step in the vehicle and make sure that all doors are closed completely.
6) Insert the key into the ignition key cylinder.
7) Wait for more than 5 seconds.
8) After turning the key to the ACC position, turn the key from the ACC to the
ON position five times (Last position : ON).
Ë Status Monitor LED will illuminate for 30 seconds.
9) While the LED is illuminated :
• Open and close the
driver’s door 4 times.
• Turn the key to the ACC position.
Ë LED will illuminate for 30 seconds.
Ë Indicator lights will flash 4 times.
Answer back ON :
10) While the LED is illuminated:
• Open and close the driver’s door 1 time.
• Turn the key ACC-ON-ACC 1 time (Last position : ACC).
Ë Indicator lights will flash once.
Ë LED will extinguish.
Answer back OFF :
10) While the LED is illuminated :
• Open and close the driver’s door 2 times.
• Turn the key ACC-ON-ACC 1 time (Last position : ACC).
Ë Indicator lights will flash twice.
Ë LED will extinguish.
ACC
ON
START
LOCK