Toyota TNS400, Руководство пользователя

Страница: 24 / 270

TNS400
5.4. Calling up a preset channel from the
TomTom display
Touch the relevant preset switch to call up the station on the audio screen.
5.5. Memorizing stations
Memorizing stations manually
1. Tune into the station to be memorized for the preset channel.
2. Press the [MODE/PTY] button to select the rotary select mode.
3. Turn the [VOL] rotary knob to select one of the preset switches P1 to P6.
4. Press the [ENTER] button until “P MEMORY” appears on the sub display.
The selected station is memorized and the preset registration number and frequency are
indicated on the display.
To manually set additional selected stations for the remaining preset channels, repeat this
procedure for each channel. If the stations have been stored in memory, pressing a switch from
[] to [6] will tune to that preset station.
Caution: If the vehicle’s battery is disconnected (for repairs to the vehicle or for removal of the
main unit), all stations in memory will be lost. In this case, set the stations in memory again.
Memorizing stations manually on the TomTom display
1. Tune into the station to be memorized.
2. Press the [SCREEN] button and switch the display to the audio screen.
Preset switches