PART NUMBER: PZQ72-
420
0
PAGE 10 OF 13
RAV4
CARGO BARRIER
DECEMBER 2012 ONWARDS
ACCESSORY PART NUMBER: PZQ72-
420
0
6.1.
Insert the frame assembly though the rear door of the vehicle
and place the barrier in position behind the second row seats.
6.2.
Fasten the two top rear straps to the coach bolt
on the frame using the thumb nuts , M10 flat washer
and M10 wave washers .
6.3.
With the top straps fastened to the frame, fasten the free end
of the straps to the upper mounts previously installed in the
vehicle. Place the 16mm plastic bush into the 19mm hole
in the headliner and fasten the strap to the vehicle using the
35mm cargo bolt and M10 wave washer .
6.4.
Installing the lower mounting brackets.
6.5.
Fasten the rear bottom bracket to the cargo barrier by
placing the slotted hole in the bracket over the coach bolt in the
cargo barrier frame and secure in place using a thumb nut
and an M10 wave washer .
6.6.
Fasten the free end of the lower rear bracket to the lower
wheel brace bracket ( & ) through the trim using a
16mm plastic bush , M10 wave washer and a 35mm
cargo bolt .
6.7.
With all the brackets attached to the barrier and the vehicle,
ensure that the barrier is positioned centrally about the vehicle
and tighten all thumb nuts and cargo bolts to a firm hand
tightness.
6.8.
After completion, store the fitting instructions
in the vehicles glove box for future reference.
6.
Installing the barrier in the rear position.
ISSUE 1
:
15
25
25
24
20
17
17
12
13
18
18
14
20
20
20
