TOYOTA PRIUS 2008
-
INTERFACE KIT FOR IPOD
Procedure
Page 11 of 13 pages
DIO
Issue: B 9/08/08
6.
Route the iPod Cable Terminal.
(a)
Make a round hole through which the cable
can pass at the location on the glove box
shown in the illustration. (Fig. 6-1)
(1)
Hole saw is 1 1/8” (29 mm).
(2)
De-bur drilled hole.
(3)
Clean shavings from glove box after drilling.
(b)
Route the iPod cable through the hole from
outside of the glove box. (Fig. 6-2)
(c)
Apply the grommet to the iPod cable. The
distance from the grommet to iPod cable
terminal should be approx. 14 inch. (Fig. 6-3)
(d)
Secure the grommet to the hole from the
inside of the glove box. (Fig. 6-4)
1 1/8” Hole Saw
Fig. 6-1
Fig. 6-2
Inside the Glove Box
Fig. 6-3
Inside the Glove Box
14 inches (35 cm)
Fig. 6-4
Inside the Glove Box
