Toyota PRIUS PRIME 2018, Краткое руководство пользователя

Страница: 41 / 68

39
CHANGING THE PCS ALERT TIMING
Far
Middle
(default)
Near
(1) Press “ ” switches and select from the Multi-Information Display (MID).
(2) Press “ ” switches and select from the MID and then press “ ”. The
setting screen is displayed.
(3) Press “ ” each time to change the setting. Each time it is pressed, the
response to the PCS alert timing changes as shown above. You can press “ ” to
go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same.)
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to first provide an
alert and then automatic braking if needed.
In certain conditions, the PCS system included with the TSS-P package may also
help to detect a pedestrian in front of your vehicle. With Toyota Safety Sense™ P,
PCS uses an in-vehicle camera and front-grill mounted millimeter-wave radar to
help detect a pedestrian in front of your vehicle in certain conditions. The in-vehicle
camera of PCS detects a potential pedestrian based on size, profile, and motion of
the detected pedestrian. However, a pedestrian may not be detected depending
on the conditions, including the surrounding brightness and the motion, posture,
size, and angle of the potential detected pedestrian, preventing the system from
operating or engaging.
Refer to a Toyota Owner’s Manual for additional information.
PEDESTRIAN DETECTION FUNCTION
OVERVIEW
ELECTRIC VEHICLE SYSTEM
FEATURES & OPERATIONS
TOYOT
A SAFETY SENSE
SAFETY &
EMERGENCY FEATURES