Toyota Pius 2010, Руководство по ремонту

Страница: 30 / 41

2010 Toyota Prius Repair Manual
Text in Illustration
*1 Micrometer
Standard thickness:
9.0 mm (0.354 in.)
Minimum thickness:
7.5 mm (0.295 in.)
If the disc thickness is less than the minimum, replace the
rear disc.
5. INSPECT DISC RUNOUT
(a) Inspect the rear axle hub bearing looseness and axle hub runout .
(b) While holding the disc using SST, tighten the disc with
the 5 hub nuts.
SST: 09330-00021
Torque: 103 N·m (1050 kgf·cm, 76ft·lbf)
(c) Using a dial indicator with magnetic base, measure the
disc runout 10 mm (0.394 in.) away from the outer edge of
the rear disc.
Text in Illustration
*1 Dial Indicator
Maximum disc runout:
0.15 mm (0.00591 in.)
NOTICE: