Toyota Pius 2010, Руководство по ремонту

Страница: 29 / 41

2010 Toyota Prius Repair Manual
INSPECTION
1. INSPECT BRAKE CYLINDER AND PISTON
(a) Check the cylinder bore and piston for rust and scoring. If necessary, replace the disc brake
cylinder and piston.
2. INSPECT PAD LINING THICKNESS
(a) Using a ruler, measure the pad lining thickness.
Text in Illustration
*1 Ruler
Standard thickness:
9.5 mm (0.374 in.)
Minimum thickness:
1.0 mm (0.0394 in.)
If the pad lining thickness is equal to the minimum
thickness or less, replace the brake pads with a disc brake
pad kit.
HINT:
Be sure to check the wear of the rear disc after replacing
the brake pads with new ones.
3. INSPECT REAR DISC BRAKE PAD SUPPORT PLATE
(a) Make sure that the rear disc brake pad support plates have sufficient rebound, no
deformation, cracks or wear, and that all rust and dirt are removed. If necessary, replace the rear
disc brake pad support plates.
4. INSPECT DISC THICKNESS
(a) Using a micrometer, measure the disc thickness.