manualshive.com logo in svg

Toyota Lexus IS300, Руководство пользователя


Поделиться
Скачать
background image

CHASSIS

335

CHECKING AND REPLACING TIRES

When to replace your tires

SV63006

 1

New tread    2 Tread wear indicator

 3

Worn tread

Replace the tires when the tread wear indicators show.
The location of the tread wear indicators is shown by the
”TWI” or ”

∆

” marks molded on the sidewall of each tire.

The tires on your Lexus have built–in tread wear indicators to
help you know when the tires need replacement.  When the
tread depth wears to 1.6 mm (0.06 in.) or less, the indicators
will appear.  If you can see the indicators in two or more
adjacent grooves, the tire should be replaced.

Vehicles equipped with 215/45ZR17 or 225/45ZR17 tires:
Your Lexus has been fitted with specially developed tires which
provide exceptional dynamic performance under general road
conditions.  However your riding comfort may worsen a little
and road noise may increase during driving.  You may also
notice that your tires will wear more rapidly and tire grip
performance will be reduced on the snowy and/or icy roads
when compared to standard tires.  Be sure to have snow tires
or tire chains on the snowy and/or icy roads and drive carefully
with the speed appropriate for road conditions.

NOTICE

Low profile tire like 215/45ZR17 or 225/45ZR17 may have
greater damage than usual tires to its tire wheel when
receiving impact from the road surface.  Therefore, pay
attention to the followings.

Be sure to use with proper tire pressure. If the tire
pressure is low, the tire may have a greater damage.
For detailed information about tire pressure, see
page 326 or 327.

Avoid driving onto high, sharp–edged objects and
other road hazards.  Failure to do so can lead to
severe tire damage.

The effectiveness of snow tires is lost if the tread wears
down below 4 mm (0.16 in.).

If you have tire damage such as cuts, splits, cracks deep
enough to expose the fabric, or bulges indicating internal
damage, the tire should be replaced.

2003 IS300 from Aug. ’02 Prod. (OM53439U)

Содержание Lexus IS300






































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Lexus IS300

Metra Electronics 99-3010S Installation Instructions Manual preview
99-3010S
Бренд: Metra Electronics Страницы: 14
Daihatsu S85 Wiring Diagrams preview
S85
Бренд: Daihatsu Страницы: 41
Daihatsu S85 Workshop Manual preview
S85
Бренд: Daihatsu Страницы: 268
Lange Originals HOIST-A-TOP JL CRANK Installation Instructions Manual preview
HOIST-A-TOP JL CRANK
Бренд: Lange Originals Страницы: 13
Alfa Romeo FIX&GO automatic Manual preview
FIX&GO automatic
Бренд: Alfa Romeo Страницы: 40
Yescom YES5062 User Manual preview
YES5062
Бренд: Yescom Страницы: 4
Z Automotive Tazer DT User Manual preview
Tazer DT
Бренд: Z Automotive Страницы: 16
Audiovox UniStreamONE Installation Manual preview
UniStreamONE
Бренд: Audiovox Страницы: 24
Mercedes-Benz GLE Coupe Brief Overview preview
GLE Coupe
Бренд: Mercedes-Benz Страницы: 2
Westin 25-0560 Instructions preview
25-0560
Бренд: Westin Страницы: 2
Xblitz Mirror 2016 User Manual preview
Mirror 2016
Бренд: Xblitz Страницы: 30
JBL smartbase Quick Start Manual preview
smartbase
Бренд: JBL Страницы: 12
Whispbar K835W Fitting Instructions For Basic Carrier preview
K835W
Бренд: Whispbar Страницы: 63
Ferve F-2024 Operating Instructions Manual preview
F-2024
Бренд: Ferve Страницы: 28
Billien OBU 5050 Quick Installation Manual preview
OBU 5050
Бренд: Billien Страницы: 2
Lexus ES 2021 Quick Manual preview
ES 2021
Бренд: Lexus Страницы: 28
Waeco MagicSpeed MS900 Installation Manual preview
MagicSpeed MS900
Бренд: Waeco Страницы: 120
Edelbrock 29135 Installation Instructions preview
29135
Бренд: Edelbrock Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды