Toyota LAND CRUISER Скачать руководство пользователя страница 94

Страница: 94 / 622

1-3. Adjustable components (seats, mirrors, steering wheel)

riv

L/C200_OM_OM60K60E_(AE)

Third outboard seats

While pressing in the flathead screwdriver, pull up the head restraint.

■

Installing the head restraints

Align the head restraint with the installation holes.

Push down the head restraint to the lock position.

■

When not using the third center seat head restraint (if equipped)

CAUTION

■

Head restraint precautions

Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.

●

Use the head restraints designed for each respective seat.

●

Adjust the head restraints to the correct position at all times.

●

After adjusting the head restraints, push down on them and make sure
they are locked in position.

●

Do not drive with the head restraints removed.

Push a flathead screwdriver into the slot.
The slot is located on the left side of the
left head restraint anchor.

ITY13C035

STEP

Open the zipper on the back of the third
seat and stow the head restraint inside.

ITY13C043

Not

for

Reproduction

Содержание LAND CRUISER















































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание LAND CRUISER

Отзывы:

Бренды по названию

Популярные бренды

Toyota LAND CRUISER, Руководство пользователя

Результаты поиска

Содержание LAND CRUISER

Отзывы:

Бренды по названию

Популярные бренды