manualshive.com logo in svg

Toyota LAND CRUISER, Руководство пользователя

Поделиться
Скачать
Toyota LAND CRUISER Скачать руководство пользователя страница 497

496

4-3. Do-it-yourself maintenance

L/C200_OM_OM60K60E_(AE)

CAUTION

■

Replacing light bulbs

●

Turn off the headlights. Do not attempt to replace the bulb immediately
after turning off the headlights.
The bulbs become very hot and may cause burns.

●

Do not touch the glass portion of the light bulb with bare hands. Hold the
bulb by the plastic or metal portion.
If the bulb is scratched or dropped it may blow out or crack.

●

Fully install light bulbs and any parts used to secure them. Failing to do so
may result in heat damage, fire, or water entering the headlight unit. This
may damage the headlights or cause condensation to build up on the lens.

●

Vehicles with discharge headlights: 
While the low beam headlights are
turned on, and for a short time after
they have been turned off, metal com-
ponents at the rear of the headlight
assembly will be extremely hot. 
To prevent burns, do not touch these
metal components until you are certain
they have cooled down.

Metal 

components

Not 

for 

Reproduction

Содержание LAND CRUISER















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды