Toyota IS300h, Руководство пользователя

Страница: 279 / 415

279
1. SPEECH COMMAND SYSTEM OPERATION
5
S
PEECH CO
MMAND
SYSTEM
IS300h/250_Navi_EE
 When a contact has multiple telephone
numbers registered in the contact list, a
candidate list will be displayed. If the
desired telephone number is not dis-
played on the top of the screen, say the
number of the desired telephone num-
ber from the candidate list to select a
telephone number from the candidate
list.
3
Say or select “Dial” to call the tele-
phone number.
1
Press the talk switch.
 “Dial <number>” is displayed in the
“Shortcuts” screen.
 When “Dial <number>” on the “Short-
cuts” screen is dimmed, the telephone
number voice recognition cannot be
used. Check the Bluetooth
®
phone con-
nection.
2
Say the telephone number.
 In the same manner as it is displayed on
the screen, “Dial <number>”, after say-
ing “Dial” say the telephone number.
 Say the telephone number one digit at a
time.
For example, if the telephone number is
2345678:
Say “two three four five six seven
eight”
 As the system cannot recognize addi-
tional numbers, say the complete num-
ber without stopping.
 When the system recognizes multiple
telephone numbers, a telephone number
candidate list will be displayed on the
screen. If the desired telephone number
is not displayed on the top of the
screen, say the number of the desired
telephone number from the candidate
list to select a telephone number from
the candidate list.
3
Say or select “Dial” to call the tele-
phone number.
SPEECH COMMAND
EXAMPLE: DIAL NUMBER