Toyota Highlander guide Скачать руководство пользователя страница 319

Страница: 319 / 499

317

5-4. Using the other interior features

HIGHLANDER_AE (OM48F11E)

teri

or f

eatu

res

The temperature display shows temperatures within the range of -40

(-40

F) to 50

C (122

F).

■

The outside temperature is displayed when

Vehicles without a smart entry & start system

The engine switch is in the “ON” position.

Vehicles with a smart entry & start system

The engine switch is in IGNITION ON mode.

■

Display

In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.

●

When the vehicle is stopped, or moving at low speeds (less than 25 km/h
[15 mph]).

●

When the outside temperature has changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)

■

When the outside temperature display flashes

Vehicles with monochrome display

If the outside temperature is 3°C (37°F) or less, the temperature display
flashes 10 times, and then illuminates.

Vehicles with color display

If the outside temperature is 3°C (37

F) or less, the ice warning indicator

flashes 10 times, and then illuminates.

■

When “--” and “E” is displayed

The system may be malfunctioning. Take your vehicle to your Toyota dealer.

Outside temperature display

Vehicles with monochrome dis-
play

Vehicles with color display

NOT FOR REPRODUCTION

Содержание Highlander guide




















































































































































































































































































































































































































































































































Результаты поиска

Содержание Highlander guide

Отзывы:

Похожие инструкции для Highlander guide

Бренды по названию

Популярные бренды

Toyota Highlander guide, Руководство пользователя

Результаты поиска

Содержание Highlander guide

Отзывы:

Похожие инструкции для Highlander guide

Бренды по названию

Популярные бренды