Toyota Highlander guide Скачать руководство пользователя страница 269

Страница: 269 / 499

267

4-5. Using the driving support systems

HIGHLANDER_AE (OM48F11E)

riv

The blind spot that vehicles can be detected in are outlined below.

The range of the detection area
extends to:

Approximately 3.5 m (11.5 ft.)
from the side of the vehicle

The first 0.5 m (1.6 ft.) from the
side of the vehicle is not in the
detection area

Approximately 3 m (9.8 ft.) from
the rear bumper

Approximately 1 m (3.3 ft.) for-
ward of the rear bumper

■

The Blind Spot Monitor is operational when

The BSM main switch is set to on and vehicle speed is greater than approxi-
mately 16 km/h (10 mph).

■

The Blind Spot Monitor will detect a vehicle when

●

A vehicle in an adjacent lane overtakes your vehicle.

●

Another vehicle enters the detection area when it changes lanes.

■

Conditions under which the Blind Spot Monitor will not detect a vehicle

The Blind Spot Monitor is not designed to detect the following types of vehi-
cles and/or objects:

●

Small motorcycles, bicycles, pedestrians etc.

●

Vehicles traveling in the opposite direction

●

Guardrails, walls, signs, parked vehicles and similar stationary objects

●

Following vehicles that are in the same lane

●

Vehicles driving 2 lanes across from your vehicle

: Depending on conditions, detection of a vehicle and/or object may occur.

The Blind Spot Monitor detection areas

NOT FOR REPRODUCTION

Содержание Highlander guide




















































































































































































































































































































































































































































































































Результаты поиска

Содержание Highlander guide

Отзывы:

Похожие инструкции для Highlander guide

Бренды по названию

Популярные бренды

Toyota Highlander guide, Руководство пользователя

Результаты поиска

Содержание Highlander guide

Отзывы:

Похожие инструкции для Highlander guide

Бренды по названию

Популярные бренды