Toyota Highlander 2020, Руководство пользователя

Страница: 87 / 560

87
2-1. Instrument cluster
HIGHLANDER_U
2
Veh
icle
st
atu
s in
form
at
ion
an
d i
ndi
cat
o
rs
■
AWD Control (if equipped)
Torque distribution display
Displays the drive status of each
wheel in 6 steps from 0 to 5.
G-force display
*
Displays the size and direction of
the G-force applied to the vehicle
via changes to the position of the
ball on the display.
Maximum G-force course
*
This item is linked with the G-force
display and the course of the past
movement of the ball is displayed.
Press and hold to reset the
record.
Wheel spin display
When a tire is spinning, its icon on
the display changes its color and
blinks.
*
: This item is displayed only when
driving mode is set to sport mode.
■
Tire pressure
• It may take a few minutes to dis-
play the tire inflation pressure
after the engine switch is turned to
ON. It may also take a few min-
utes to display the tire inflation
pressure after inflation pressure
has been adjusted.
• “---” may be displayed if the tire
position information cannot be
determined due to unfavorable
radio wave conditions.
• Tire inflation pressure changes
with temperature. The displayed
values may also be different from
the values measured using a tire
pressure gauge.
■
Changing settings
Use the meter control switches
on the steering wheel to change
settings.
1
Press or of the meter
control switch to select .
2
Press or of the meter
control switch to select the
desired item to be custom-
ized.
3
Press or press and hold .
The available settings will differ
depending on if is pressed or
pressed and held. Follow the
instructions on the display.
■
Setting items

LTA (Lane Tracing Assist)
(

P.241)
Press and hold to change the
settings of the following items:
• “Lane Center”
Select to enable/disable the lane
centering function.
• “Steering Assist”
Select to enable/disable steering
wheel assistance.
• “Sensitivity”
Select to set the warning sensitivity.
Settings display ( )