![Toyota Highlander 2020 Скачать руководство пользователя страница 421](http://html.mh-extra.com/html/toyota/highlander-2020/highlander-2020_owners-manual_1142426421.webp)
421
6-3. Do-it-yourself maintenance
HIGHLANDER_U
6
Maintena
nce
a
nd
ca
re
Even if the vehicle is not driven at
approximately 25 mph (40 km/h) or
more, registration can be com-
pleted by driving for a long time.
However, if registration does not
complete after driving for 1 hour or
more, perform the procedure again
from the beginning.
9
Initialize the tire pressure
warning system. (
7-inch display
1
Park the vehicle in a safe
place and turn the engine
switch off.
Initialization cannot be performed
while the vehicle is moving.
2
Adjust the tire inflation pres-
sure to the specified cold tire
inflation pressure level.
(
Make sure to adjust the tire pres-
sure to the specified cold tire infla-
tion pressure level. The tire
pressure warning system will oper-
ate based on this pressure level.
3
Turn the engine switch to
ON.
4
Press
or
of the meter
control switch to select
.
5
Press
or
of the meter
control switch, select
and
then press and hold
.
6
Press
or
of the meter
control switch, select “TPWS”
and then press
.
7
Press
or
of the meter
control switch, select
“Change Wheel” and then
press
until the tire pres-
sure warning light starts
slowly blinking 3 times.
The change wheel set mode is acti-
vated and registration is started.
Then a message will be displayed
on the multi-information display.
When registration is being per-
formed, the tire pressure warning
light will blink for approximately 1
minute then illuminate and “--” will
be displayed for the inflation pres-
sure of each tire on the multi-infor-
mation display.
8
Drive the vehicle at approxi-
mately 25mph (40 km/h) or
more for approximately 10 to
30 minutes.
When registration is completed, the
tire pressure warning light will go off
and the inflation pressure of each
tire will be displayed on the
multi-information display.
Even if the vehicle is not driven at
approximately 25 mph (40 km/h) or
more, registration can be com-
pleted by driving for a long time.
However, if registration does not
complete after driving for 1 hour or
more, perform the procedure again
from the beginning.
9
Initialize the tire pressure
warning system. (
■
When registering ID codes
●
ID code registration is performed
while driving at a vehicle speed of
approximately 25 mph (40 km/h)
or more.
●
Before performing ID code regis-
tration, make sure that no wheels
with tire pressure warning valve
and transmitters installed are near
the vehicle.
●
Make sure to initialize the tire
pressure warning system after
Содержание Highlander 2020
