Toyota Hiace, Руководство пользователя

Страница: 115 / 204

Finish
HIACE_AE (L/O 0308)
108
If the engine will not start...
See “If your vehicle will not start” in Sec-
tion 4.
NOTICE
z
Do not crank for more than 30 sec-
onds at a time. This may overheat
the starter and wiring systems.
z
Do not race a cold engine.
z
If the engine becomes difficult to
start or stalls frequently, have the
engine checked immediately.
It is a good idea to do a safety check
before starting out on a trip. A few min-
utes of checking can help ensure safe and
pleasant driving. Just a basic familiarity
with your vehicle is required and a careful
eye! Or, if you would like, your Toyota
dealer will be pleased to make this check
for you at a nominal cost.
CAUTION
If you make this check in an enclosed
garage, make sure there is adequate
ventilation. Engine exhaust is poison-
ous.
BEFORE STARTING THE ENGINE
Outside the vehicle
Tires (spare included).
Check the pres-
sure with a gauge and look carefully for
cuts, damage, or excessive wear.
Wheel nuts. Make sure no nuts are miss-
ing or loose.
Fluid leaks. After the vehicle has been
parked for a while, check underneath for
leaking fuel, oil, water, or fluid. (Water
dripping from the air conditioning after use
is normal.)
Lights.
Make sure the headlights, stop
lights, tail lights, turn signals and other
lights are all working. Check the headlight
aim.
Inside the vehicle
Jack and wheel nut wrench.
Make sure
you have your jack and wheel nut wrench.
Seat belts. Check that the buckles lock
securely. Make sure the belts are not
worn or frayed.
Instruments and controls. Especially
make sure the service reminder indicators,
instrument lights, and defroster are work-
ing.
Brakes. Make sure the pedal has enough
clearance.
Brake fluid level. Make sure the brake
fluid level is correct.
Spare fuses. Make sure you have spare
fuses. They should cover all the amperage
ratings designated on the fuse box lid.
Battery and cables. All the battery cells
should be filled to the proper level with
distilled water. Look for corroded or loose
terminals and a cracked case. Check the
cables for good condition and connections.
Coolant level (diesel engine). Make sure
the coolant level is correct. (See Section
7 − 2 for instructions.)
Pre − trip safety check
Not for Reproduction