Toyota Hiace, Руководство пользователя

Страница: 114 / 204

Finish
HIACE_AE (L/O 0308)
107
NOTICE
z
Do not crank for more than 30 sec-
onds at a time. This may overheat
the starter and wiring systems.
z
Do not race a cold engine.
z
If the engine becomes difficult to
start or stalls frequently, have the
engine checked immediately.
Before starting the engine, be sure to fol-
low the instructions in “(a) Before crank-
ing”.
Normal starting procedure (engine cold)
1. Turn the key to “ON” and verify that
the engine preheating indicator light
has come on. Keep the key in the
“ON” position until the light goes off.
2. With the accelerator pedal about half-
way down, crank the engine by turning
the key to “START”. Release the key
and accelerator pedal when the engine
starts.
Engine should be warmed up by driving,
not in idle. For warming up, drive with
smoothly turning engine until engine cool-
ant temperature is within normal range.
If the weather is extremely cold...
1. Turn the key to “ON” and verify that
the engine preheating indicator light
has come on. Keep the key in the
“ON” position until the light goes off.
2. With the accelerator pedal fully down
to the floor, crank the engine by turn-
ing the key to “START”. Release the
key and accelerator pedal when the
engine starts.
3. After the engine runs, you are ready to
drive.
If the engine runs rough, adjust the
throttle knob to increase engine speed to
where the engine runs smoothly. After
that, be sure to return the throttle knob to
its original position before driving off.
If the engine is warm...
Follow the above “Normal starting proce-
dure”.
If the engine stalls...
Simply restart it, using the correct proce-
dure given above, depending on the en-
gine temperature.
(b) Starting the engine
(diesel engine)
Not for Reproduction