264
5-1. Essential information
TMC corolla_AE_(L/O_0703)
Installing towing eyelets
Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a
rag between the screwdriver and
the vehicle body, as shown in the
illustration.
Insert the towing eyelet into the
hole and tighten partially by
hand.
NOTICE
■
To prevent causing serious damage to the transmission
(vehicles with an automatic transmission)
Never tow this vehicle from the rear with the front wheels on the ground.
This may cause serious damage to the transmission.
■
When towing a vehicle without using a towing dolly
(vehicles with a manual transmission)
The engine switch must not be OFF.
STEP
1
STEP
2
Corolla_Sedan_AE_12A43E.book 264 ページ 2007年5月9日 水曜日 午前9時14分
Not
For
Reproduction