Toyota COROLLA CROSS HYBRID 2020 Скачать руководство пользователя страница 189

Страница: 189 / 456

187

4-5. Using the driving support systems

Driving

COROLLA CROSS HYBRID_Kouzui_GE

WARNING

●

If the part of the windshield in front

of the front camera is fogged up or

covered with condensation, or ice,

use the windshield defogger to

remove the fog, condensation, or

ice. (



P.301)

●

If water droplets cannot be properly

removed from the area of the wind-

shield in front of the front camera by

the windshield wipers, replace the

wiper insert or wiper blade.

●

Do not attach window tint to the

windshield.

●

Replace the windshield if it is dam-

aged or cracked.

After replacing the windshield, the

front camera must be recalibrated.

Contact your Toyota dealer for

details.

●

Do not allow liquids to contact the

front camera.

●

Do not allow bright lights to shine

into the front camera.

●

Do not dirty or damage the front

camera.

When cleaning the inside of the

windshield, do not allow glass

cleaner to contact the lens of the

front camera. Also, do not touch the

lens.

If the lens is dirty or damaged, con-

tact your Toyota dealer.

●

Do not subject the front camera to a

strong impact.

●

Do not change the installation posi-

tion or direction of the front camera

or remove it.

●

Do not disassemble the front cam-

era.

●

Do not modify any components of

the vehicle around the front camera

(inside rear view mirror, etc.) or ceil-

ing.

●

Do not attach any accessories to

the hood, front grille or front bumper

that may obstruct the front camera.

Contact your Toyota dealer for

details.

●

If a surfboard or other long object is

to be mounted on the roof, make

sure that it will not obstruct the front

camera.

●

Do not modify the headlights or

other lights.

COROLLA CROSS HYBRID_OM_General_OM16537E

Содержание COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Результаты поиска

Содержание COROLLA CROSS HYBRID 2020

Отзывы:

Похожие инструкции для COROLLA CROSS HYBRID 2020

Бренды по названию

Популярные бренды

Toyota COROLLA CROSS HYBRID 2020, Руководство пользователя

Результаты поиска

Содержание COROLLA CROSS HYBRID 2020

Отзывы:

Похожие инструкции для COROLLA CROSS HYBRID 2020

Бренды по названию

Популярные бренды