Celica
TNS 500
Celica (RHD) - 25
09-99
MONITOR INSTALLATION
1.
Connect the splicing connector of wire
harness
to the speed sensor wire
(violet/white) of the wire harness sub-
assy
of the monitor
.
2.
Connect the wire harness
radio con-
nector to the audio assy, and 8P con-
nector to the monitor
.
1
3
1
2
3
The way to connect the splicing connector
After checking the type and line color of the connector,
lock it.
Even if the hinge of the connector is broken, the perfor-
mance does not charge.
Do not reuse the connector.
3
2
1
Wrap the urethane tape around to
hold the harness.
Cord color : violet/white
3
2
Center Brace Bracket
Radio Connector
8P Connector
Bild 33 - Figure 33
Vehicle
Wire Harness
Wire Tie
Downloaded from
www.Manualslib.com
manuals search engine
