Toyota Car Скачать руководство пользователя страница 50

Страница: 50 / 230

—Child restraint system

A child restraint system for a small

child or baby must itself be properly

restrained on the seat with either the
lap belt or the lap portion of the lap/

shoulder belt. You must carefully con-

sult the manufacturer’s instructions
which accompany the child restraint

system.

To provide proper restraint, use a child
restraint system following the manufactur-

er’s instructions about the appropriate age

and size of the child for the child restraint
system.
Install the child restraint system correctly
following the instructions provided by its

manufacturer. General directions are also

provided under the following illustrations.
Double

−

cab models—

The child restraint system should be
installed on the rear seat. According to

accident statistics, the child is safer when

properly restrained in the rear seat than
in the front seat.

CAUTION

When the child restraint system is
not in use:

Keep the child restraint system

properly secured on the seat even
if it is not in use. Do not store the

restraint unsecured in the passen-

ger compartment.

If it is necessary to detach the

child restraint system, remove it
from the vehicle or store it securely

in the luggage compartment. This

will prevent it from injuring passen-
gers in the event of a sudden stop,

swerving or accident.

The 3

−

point type seat belt locks when the

belt is pulled out quickly but it does not

have an additional fully

−

extended lock

mode. When installing a child restraint

system with a 3

−

point seat belt securely,

you will need a locking clip.
If your child restraint system does not

provide a locking clip, you can purchase

the following item from your Toyota dealer.

Locking clip for child restraint system

(Part No. 73119

−

22010)

Содержание Car







































































































































































































































Результаты поиска

Содержание Car

Отзывы:

Toyota Car, Руководство пользователя, Страница: 50 / 230

Результаты поиска

Содержание Car

Отзывы: