Toyota Car Скачать руководство пользователя страница 146

Страница: 146 / 230

136

Avoid continuous speeding up and

slowing down.

Stop

−

and

−

go driving

wastes fuel.

Avoid unnecessary stopping and

braking.

Maintain a steady pace. Try

to time the traffic signals so you only
need to stop as little as possible or

take advantage of through streets to

avoid traffic lights. Keep a proper dis-
tance from other vehicles to avoid sud-

den braking. This will also reduce wear

on your brakes.

Avoid heavy traffic or traffic jams

whenever possible.

Do not rest your foot on the clutch

or brake pedal.

This causes premature

wear, overheating and poor fuel econo-
my.

Maintain a moderate speed on high-
ways.

The faster you drive, the greater

the fuel consumption. By reducing your

speed, you will cut down on fuel con-
sumption.

Keep the front wheels in proper
alignment.

Avoid hitting the curb and

slow down on rough roads. Improper

alignment not only causes faster tire
wear but also puts an extra load on

the engine, which, in turn, wastes fuel.

Keep the bottom of your vehicle free

from mud, etc.

This not only lessens

weight but also helps prevent corro-
sion.

Keep your vehicle tuned

−

up and in

top shape.

A dirty air cleaner, carbure-

tor out of adjustment, improper valve

clearance, dirty plugs, dirty oil and

grease, brakes not adjusted, etc. all
lower engine performance and contrib-

ute to poor fuel economy. For longer

life of all parts and lower operating
costs, keep all maintenance work on

schedule, and if you often drive under

severe conditions, see that your vehicle
receives more frequent maintenance.

(See page 166.)

CAUTION

Never turn off the engine to coast
down hills. Your power steering and

brake booster will not function with-

out the engine running. Also, the
emission control system operates

properly only when the engine is run-

ning.

Содержание Car







































































































































































































































Результаты поиска

Содержание Car

Отзывы:

Toyota Car, Руководство пользователя, Страница: 146 / 230

Результаты поиска

Содержание Car

Отзывы: