Remote Engine Starter Troubleshooting Guide Page 13
INSPECTION 1/9
(a) Ignition must be “OFF” when starting this procedure.
(a) Press the LOCK button.
(b) Confirm the doors are locked.
<Smart Entry Vehicle>
(a) Start the engine with the POWER button.
(b) Confirm the engine is activated.
<Non Smart Entry Vehicle>
(a) Start the engine with the key in the IG key cylinder.
(b) Confirm the engine is activated.
3
CHECK REMOTE ENGINE START OPERATION
(a)
Press and release the LOCK button twice within 2 seconds.
Then immediately press and hold the LOCK button for 3 seconds.
ENGINE DOES NOT START BY REMOTE.
INSPECTION PROCEDURE
1
CHECK REMOTE KEYLESS ENTRY OPERATION
2
CHECK ENGINE OPERATION
HINT: EXPLAIN THE FOLLOWING INFORMATION TO CUSTOMER:
The transmission range for remote start may be shorter than the remote’s basic
keyless entry operation. Range can also be affected by the surrounding
environment.
END
GO TO VEHICLE’S REPAIR MANUAL
AND CHECK ENGINE OPERATION
OK
OK
GO TO VEHICLE’S REPAIR MANUAL
AND CHECK REMOTE KEYLESS
ENTRY OPERATION
NO
NO
NO
OK
GO TO STEP 4
