Toyota BZ4X 2023, Руководство пользователя

Страница: 240 / 628

240
5-2. Driving procedures
Owners Manual_USA_M42C01_en
position switch to change the
shift position to P.
 If the automatic P position
switching operation selection
function is performed oper-
ated with the EV system
stopped, the automatic P
position selection function
may not operate.
Always perform the operation
with the EV system started.
*
: To keep this state, do not operate
the power switch. If the power
switch is operated repeatedly, the
power switch will turn off after the
shift position has automatically
changed to P.
■
“X-MODE”

P.382
Acceleration/deceleration con-
trol can be performed only by
operating the accelerator pedal,
and the frequency of switching
to the brake pedal can be
greatly reduced. Since the
deceleration when the accelera-
tor pedal is released is stronger
than that of a conventional vehi-
cle, the vehicle can be deceler-
ated smoothly by slowly
releasing the pedal the acceler-
ator pedal without completely
releasing it.
When the Regeneration Boost
switch is pressed, the regenera-
tive braking force, when the
accelerator pedal is released,
becomes stronger than usual.
■ When Regeneration Boost can-
not be used In the following
cases, the system does not
operate.
● When “X-MODE” is activated (If
equipped)
● When the brake system or EV
system is malfunctioning
● When regenerative braking is lim-
ited
Regenerative braking may be
restricted in the following situations:
• When the amount of charge of the
traction battery is high
• When the temperature of the trac-
tion battery is low or extremely
high
• When the temperature of the elec-
tric motor or power control unit is
extremely high
• When regenerative braking is con-
tinually used for a long time
■ Regenerative Braking
● The vehicle cannot be stopped by
just releasing the accelerator
pedal. Step on the brake pedal
when the vehicle is stopped.
● If the power switch is turned off
and then the EV system is
Selecting the driving
mode
Regeneration Boost
switch