Toyota BZ4X 2023, Руководство пользователя

Страница: 109 / 628

109
2-2. Charging
Owners Manual_USA_M42C01_en
2
Elec
tric
V
ehi
cle s
ys
tem
1
Press or of the meter
control switches to select .
2
Press or of the meter
control switches to select “Vehi-
cle Settings”, and then press and
hold
.
3
Press or of the meter
control switches to select
“Charging Settings”, and then
press
.
The “Charging Settings” screen will
be displayed.
4
Press or of the meter
control switches to select
“Charging Limit”, and then press
.
The “Charging Limit” screen will be
displayed.
5
Select “Full”, “90%”, “80%”,
“70%”, “60%” or “50%” and then
press
.
● Setting operations on multimedia
1
Select .
2
Select “Vehicle customize”.
3
Select “Charging”.
4
Select “Charging limit”.
5
Select “Full”, “90%”, “80%”,
“70%”, “60%” or “50%”.
If the setting is changed during DC
charging, charging may stop due to
the operation of the DC charger
timer and the traction battery cannot
be fully charged.
■ Protection function of AC
charging inlet overheating
By installing a temperature sensor
to the AC charging inlet, prevents
parts from melting when the tem-
perature rises due to foreign matter
entering the charging connector.
When a certain temperature
increase is detected, charging is
stopped immediately.
After this, when the power switch is
off, a message will be displayed on
the multi-information display
(

P.140)
WARNING
■ When charging
Observe the following precau-
tions.
Failure to do so may cause an
unexpected accident, resulting in
death or serious injury.
● Connect to a power source suit-
able for charging. (

P.96)
● Check that the AC charging
cable, plug and outlet are free of
foreign matter.
● Before charging, check that the
AC charging inlet is not
deformed, damaged or cor-
roded, and check that the inlet
is free of foreign matter such as
dirt, snow and ice.
If there is dirt or dust in these
areas, remove completely
before inserting the charging
connector.
● Do not get the terminals of the
AC charging inlet wet.
● Only use outlets where the plug
can be securely inserted.
● Do not bundle or wind the AC
charging cable while charging,
as doing so may result in over-
heating.
● Do not touch the terminals of
the charging connector and AC
charging inlet with a sharp metal
objects (needles, etc.,) or
hands, or short them with for-
eign objects.