Toyota BT Levio LWE140, Руководство по эксплуатации продукта

Страница: 34 / 81

Product details
Product guide – BT Levio W-series
34
Automatic switch-off
For more information regarding automatic switch-off, see the Service manual.
Feature
A service technician can set the desired time in-
terval for truck switch-off in case the truck is left
unattended. This time can be set to either 4 h or
in the range of 1-20 minutes in increments of one
minute.
Benefit
The truck can be optimised for use in special settings. In surroundings with many
people, the time can be set very short to ensure unauthorised persons cannot oper-
ate the truck when the operator sometimes need to leave it unattended to take care
of other tasks, while in settings with no unauthorised people the time can be set to
a longer interval to prevent the truck being switched off before the operator returns.
Creep speed
This feature switches truck travel to inching speed
and permits truck travel with the tiller arm in the
upright position. It is activated by quickly mov-
ing the travel direction selector (R) two times
forwards or backwards. When this function is en-
gaged, ”SLO” blinks in the display. The function
can be cancelled by once again quickly moving the
travel direction selector (R) two times in either direction or by 10 seconds of inac-
tivity. The feature is also disabled if the safety reversing button is actuated. Inching
speed is 1.7 km/h. A service technician can block this feature to prevent inching
speed operation, however, by default the Creep speed mode can be activated by the
operator.
Feature
Creep speed enables truck travel at creep speed with the tiller arm in the upright
position and without any need to push buttons.
Benefit
The truck can be manoeuvred in confined areas. Because the function works with-
out any need to push buttons, the operator has both hands free to steer the truck.